Tegera ISO 30 ER32 Collet Chuck Tool Holder Balanced to 20,000 RPM NEW ^[

Description

ISO 30 ER32 Collet Chuck Tool Holder Balanced to 20,000 RPM
Product Code
202-5981
Product description
Taper: ISO3
Rear Thread Size: M12 x 1.75
Collet Series: ER32
Range: 1/8-3/4″
Projection (L): 60mm
Nose Diameter: 50mm
Runout: .0001″
Balanced to 20,000 RPM
Product features
Dynamically balanced to 20,000RPM at G2.5 by Haimer balancing machine at all location for consistent balance
Unique
design feature in the extension nose to minimize the off-balance
nature of CAT 40 taper specification.  On the side of flange a flat is
cut to compensate the weight of the metal chips lost.  This design
allows the left side and right side of the holder to achieve 50-50
perfect weight distribution in its upright position, like the
position inside a machine spindle.  Symmetrical design in evenly
weight distribution will minimize centrifugal force in high speed
spinning and thus maximize the holder’s ability to hold the cutting
tool concentric to spindle rotation
In
a generic standard ER collet nut, an internal ring is off-centered
so that an ER collet can be easily snapped into it and holds the ER
collet in place.  To minimize this off-centering,
SHARS
ER collet nut is optimized to distribute the flat sides’ area to off-set the off-center.
ER Collet Nut is also balanced to 20,000 RPM
Manufactured
from alloy steel with good core strength and long wear life.  Taper
shank is case hardened to 56-60 HRC and has a core hardness of 35-40
HRC.  The case hardness is designed to give maximum wear life without
compromising the 60-62 HRC spindle.  The core creates a damping
effect from the vibration during the high speed milling, especially in
long reach or heavy duty milling application
Taper ground
to AT3 or better accuracy standard for maximum contact with spindle.
All of SHARS CAT/BT/HSK tool holder use Stotz Air/Electronic Gaging
for production and finish inspection. Stotz has been chosen by major
aircraft companies as the best and most consistent gaging for tool
holder shanks
All critical surface are precision ground
Concentricity is less than
0.0001″
from taper to end mill pocket
Each holder comes with a lab certificate on its taper accuracy and runout measurement
Coolant through capability
Collet nut thread is precision ground
We have ACCESSORIES available:
SHARS ISO 30 M12 x 1.75 Pull Stud Retention Knob for HSD Spindle
If you need to speak to a sales person feel free to call. We are open Monday through friday 8:30 to 5:00 est. Phone:1-630-443-3244
Email:
[email protected]
SHIPPING: UPS Ground
Buyer pays
ACTUAL UPS shipping & insurance, and a $3.00 handling fee
for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS.
We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package’s recipient may need to pay these to clear customs.
PAYMENT:
We accept VISA, MasterCard and E-Check on PayPal.com
Illinois residents add 8% sales tax.
RETURNS:
If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller’s discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case.
Any questions regarding our tools, feel free to email us at
[email protected]